LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> LS 460 RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Information) >> Fuel Pressure Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Sensor: Removal: Removal

  1. PRECAUTION  See step  1
  2. DISCHARGE FUEL SYSTEM PRESSURE 
    1. Discharge fuel system pressure. Refer to PRECAUTION .
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
  4. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL .
  5. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY 
    Fig 1: Identifying No. 2 Engine Cover
    GTY287063Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FUEL PRESSURE SENSOR 
    Fig 2: Identifying Fuel Pressure Sensor Connector
    GTY105300Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector.
    2. Remove the fuel pressure sensor and gasket.
scientia non olet · About LEMON Manuals