LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> LS 460L RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Steering Angle Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Removal: Removal

NOTE:

While the battery is connected, even if the engine switch is off, the brake control system activates when the brake pedal is depressed or the door courtesy switch turns on. Therefore during servicing of the brake system components, do not operate the brake pedal and open/close the doors while the battery is connected.

  1. PRECAUTION 
    WARNING:

    Be sure to read the "PRECAUTION" thoroughly before servicing. Refer to PRECAUTION .

  2. REMOVE COWL TOP VENTILATOR LOUVER RH  . Refer to REMOVAL - Step 1
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL  . Refer to REMOVAL - Step 4
  4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  5. REMOVE SWITCH AND VOLUME CASE  . Refer to REMOVAL - Step 3
  6. REMOVE LOWER NO. 2 STEERING WHEEL COVER  . Refer to REMOVAL - Step 4
  7. REMOVE STEERING PAD  . Refer to REMOVAL - Step 4
  8. REMOVE STEERING WHEEL ASSEMBLY  . Refer to REMOVAL - Step 6
  9. REMOVE STEERING COLUMN COVER (w/o Driver Monitor Camera)  . Refer to REMOVAL - Step 9
  10. REMOVE STEERING COLUMN COVER (w/ Driver Monitor Camera)  . Refer to REMOVAL - Step 10
  11. REMOVE SPIRAL CABLE SUB-ASSEMBLY  . Refer to REMOVAL - Step 9
  12. REMOVE STEERING ANGLE SENSOR 
scientia non olet · About LEMON Manuals