Problem Symptoms Table
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
CRUISE CONTROL SYSTEM
| Symptom | Suspected Area | See |
|---|---|---|
| The cruise control main switch cannot be turned on. | Cruise control switch circuit | Refer to Cruise Control Switch Circuit |
| CRUISE main indicator light circuit | Refer to Cruise Main Indicator Light Circuit | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Vehicle speed setting cannot be performed (the cruise main indicator light on the combination meter illuminates when the main switch is turned on, but turns off when SET function is operating). | Cruise control switch circuit | Refer to Cruise Control Switch Circuit |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Vehicle speed setting cannot be performed (the cruise main indicator light on the combination meter illuminates when the main switch is turned on, and remains illuminated when SET function is operating). | Stop light switch circuit | Refer to DTC P0571: Brake Switch "A" Circuit |
| Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction | |
| Cruise control switch circuit | Refer to Cruise Control Switch Circuit | |
| Transmission range sensor circuit (for U660E) | Refer to Transmission Control Switch Circuit | |
| Transmission range sensor circuit (for U660F) | Refer to Transmission Control Switch Circuit | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The cruise control is canceled while it is operating. | Stop light switch circuit | Refer to DTC P0571: Brake Switch "A" Circuit |
| Transmission range sensor circuit (for U660E) | Refer to Transmission Control Switch Circuit | |
| Transmission range sensor circuit (for U660F) | Refer to Transmission Control Switch Circuit | |
| Cruise control switch circuit | Refer to Cruise Control Switch Circuit | |
| Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction | |
| Park/neutral position switch (for U660E) | Refer to INSPECTION | |
| Park/neutral position switch (for U660F) | Refer to INSPECTION | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Pulling back on the control main switch does not cancel the cruise control. (The cruise main indicator light remains on.) | Cruise control switch circuit | Refer to Cruise Control Switch Circuit |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Pulling back on the control main switch does not cancel the cruise control. (The cruise main indicator light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| The cruise control is not canceled when vehicle speed drops below the low speed limit. (The cruise main indicator light remains on.) | Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The cruise control is not canceled when vehicle speed drops below the low speed limit. (The cruise main indicator light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| Depressing the brake pedal does not cancel the cruise control. (The cruise main indicator light remains on.) | Stop light switch circuit | Refer to DTC P0571: Brake Switch "A" Circuit |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Depressing the brake pedal does not cancel the cruise control. (The cruise indicator main light goes off.) | ECM (for 2GR-FE) | Refer to REMOVAL |
| Moving the shift lever does not cancel the cruise control. | Transmission range sensor circuit (for U660E) | Refer to Transmission Control Switch Circuit |
| Transmission range sensor circuit (for U660F) | Refer to Transmission Control Switch Circuit | |
| Park/neutral position switch (for U660E) | Refer to INSPECTION | |
| Park/neutral position switch (for U660F) | Refer to INSPECTION | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| Hunting (Speed is not constant.) | Vehicle speed sensor circuit | Refer to DTC P0500: Vehicle Speed Sensor Malfunction |
| SFI system (for 2GR-FE) | - | |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The cruise main indicator light remains blinking. | TC and CG terminal circuit | Refer to TC and CG Terminal Circuit |
| ECM (for 2GR-FE) | Refer to REMOVAL | |
| The "SET" indicator does not comes on. (SET function operate normally.) | Combination meter assembly | Refer to COMPONENTS |
| ECM (for 2GR-FE) | Refer to REMOVAL |