LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2013 >> GS 350 Base, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Specifications) >> 2GR-FSE Engine Control >> Service Data [12/2011 - ] >> Service Data [12/2011 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Data [12/2011 - ]

CAMSHAFT OIL CONTROL VALVE

Standard resistance 1 - 2 20°C (68°F) 6.9 to 7.9 Ω
THROTTLE BODY

Standard resistance 1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
MASS AIR FLOW METER

Standard resistance 1 (THA) - 2 (E2) -20°C (-4°F) 13.6 to 18.4 kΩ
20°C (68°F) 2.21 to 2.69 kΩ
60°C (140°F) 0.49 to 0.67 kΩ
CRANKSHAFT POSITION SENSOR

Standard resistance 1 - 2 -10 to 50 °C (14 to 122°F) 1630 to 2740 Ω
50 to 100 °C (122 to 212°F) 2065 to 3225 Ω
ENGINE COOLANT TEMPERATURE SENSOR

Standard resistance 1 - 2 Approx. 20°C (68°F) 2.32 to 2.59 kΩ
Approx. 80°C (176°F) 0.310 to 0.326 kΩ
KNOCK SENSOR

Standard resistance 1 - 2 20°C (68°F) 120 to 280 kΩ
AIR FUEL RATIO SENSOR (FOR BANK 1)

Standard resistance 1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
AIR FUEL RATIO SENSOR (FOR BANK 2)

Standard resistance 1 (HA2A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
HEATED OXYGEN SENSOR (FOR BANK 1)

Standard resistance 1 (HT1B) - 2 (+B) 20°C (68°F) 11 to 16 Ω
HEATED OXYGEN SENSOR (FOR BANK 2)

Standard resistance 1 (HT2B) - 2 (+B) 20°C (68°F) 11 to 16 Ω
INTEGRATION RELAY (EFI MAIN1)

Standard resistance 2D-1 - 2E-16 Battery voltage not applied to terminals 2E-6 and 2E-10 10 kΩor higher
Battery voltage applied to terminals 2E-6 and 2E-10 Below 1 Ω
INTEGRATION RELAY (EFI MAIN2)

Standard resistance 2D-1 - 2F-12 Battery voltage not applied to terminals 2F-10 and 2E-10 10 kΩor higher
Battery voltage applied to terminals 2F-10 and 2E-10 Below 1 Ω
INTEGRATION RELAY (INJ)

Standard resistance 2D-1 - 2F-11 Battery voltage not applied to terminals 2F-10 and 2E-19 10 kΩor higher
Battery voltage applied to terminals 2F-10 and 2E-19 Below 1 Ω
INTEGRATION RELAY (IG2)

Standard resistance 2D-1 - 2F-2 Battery voltage not applied to terminals 2E-2 and 2E-10 10 kΩor higher
Battery voltage applied to terminals 2E-2 and 2E-10 Below 1 Ω
INTEGRATION RELAY (A/F)

Standard resistance 2D-1 - 2F-4 Battery voltage not applied to terminals 2E-16 and 2E-10 10 kΩor higher
Battery voltage applied to terminals 2E-16 and 2E-10 Below 1 Ω