Jam Protection Function does not Operate: Procedure

1. Initialize the power window regulator motor. Refer to INITIALIZATION [03/2012 - ] .
2. Check if the power window auto up/down function operates. Refer to OPERATION CHECK [03/2012 - ] .

   OK

   Auto up/down function operates.

NG → See step   3 

OK: Go to next step 

1. Check if the jam protection function operates for the applicable power window.

   HINT: 

   The jam protection function does not operate between the fully closed position of the door glass and the position 4 mm (0.157 in.) below that.

   OK

   Jam protection function operates.

   RESULT
   
   

   Result	Proceed to
   OK	A
   NG (Front power window regulator motor assembly RH)	B
   NG (Front power window regulator motor assembly LH)	C
   NG (Rear power window regulator motor assembly RH)	D
   NG (Rear power window regulator motor assembly LH)	E

B → See step   4 

C → See step   5 

D → See step   6 

E → See step   7 

A → END