Precaution [06/2012 - ]
WARNING:
When using the Techstream, observe the following items for safety reasons:
- Read the Techstream instruction books before using the Techstream.
- Make sure that the Techstream cable is not caught on the pedals, shift lever and steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes while using the Techstream, 2 persons are required. One person drives the vehicle and the other operates the Techstream.
NOTE:
- Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components. Refer to INSTALLATION [06/2012 - ] - Step 8 .
- Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM. Refer to INSTALLATION [06/2012 - ] - Step 8 .
- Perform Dynamic Laser Cruise Control System initialization after replacing the ECM. Refer to INITIALIZATION [06/2012 - ] .
- Perform Reset Memory (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM. Refer to INITIALIZATION [06/2012 - ] .
- Perform Registration (VIN registration) when replacing the ECM. Refer to REGISTRATION [06/2012 - ] .
HINT:
Reset Memory cannot be completed by only disconnecting the battery.