Jam Protection Function does not Operate: Procedure

1. Initialize the power window regulator motor assembly (applicable location). Refer to INITIALIZATION [08/2012 - ] .

NEXT: Go to next step 

1. Check if the power window auto up/down function operates normally. Refer to OPERATION CHECK [08/2012 - ] .

   OK

   Auto up/down function is normal.

NG → See step   4 

OK: Go to next step 

1. Check if the jam protection function operates normally for the applicable power window.

   HINT: 

   The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

   OK

   Jam protection function operates normally.

   Result

   Result	Proceed to
   OK	A
   NG (Driver side power window)	B
   NG (Front passenger side power window)	C
   NG (Rear LH side power window)	D
   NG (Rear RH side power window)	E

B → See step   5 

C → See step   7 

D → See step   6 

E → See step   8 

A → END (PROBLEM DUE TO INITIALIZATION FAILURE)