Jam Protection Function does not Operate: Procedure

1. Initialize the power window regulator motor assembly.
2. Check if the power window AUTO UP/DOWN function operates normally.

   OK

   AUTO UP/DOWN function operates normally.

NG → END (PROBLEM DUE TO INITIALIZATION FAILURE) 

OK: Go to next step 

1. Check if the jam protection function operates normally for applicable power window.

   HINT: 

   The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.

   OK

   Jam protection function operates normally.

   RESULT:
   
   

   Result	Proceed to
   OK	A
   NG (Front LH side power window)	B
   NG (Front RH side power window)	C
   NG (Rear LH side power window)	D
   NG (Rear RH side power window)	E

B → See step   3 

C → See step   5 

D → See step   4 

E → See step   6 

A → END