LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2013 >> LS 460 Base, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> VVT Sensor >> Removal [09/2012 - ] >> Removal [09/2012 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [09/2012 - ]

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  See step  1
  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY  See step  2
  3. REMOVE NO. 1 AIR CLEANER INLET  See step  3
  4. REMOVE AIR CLEANER ASSEMBLY LH 
    1. Disconnect the mass air flow meter connector.
      Fig 1: Locating MAF Meter Connector & Air Cleaner Cap Clamps
      GTY288181Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap sub-assembly LH.
    3. Remove the element from the air cleaner case.
    4. Remove the 2 nuts, clip and air cleaner case.
      Fig 2: Locating Air Cleaner Case Nuts And Clips
      GTY284162Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE AIR CLEANER ASSEMBLY RH 
    1. Disconnect the mass air flow meter connector.
      Fig 3: Locating MAF Meter Connector & Air Cleaner Cap RH Clamps
      GTY268728Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap sub-assembly RH.
    3. Remove the element from the air cleaner case.
    4. Remove the 2 nuts, clip and air cleaner case.
      Fig 4: Locating Air Cleaner Case Nuts And Clips
      GTY288139Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE VVT SENSOR 
    1. Disconnect the 4 VVT sensor connectors.
      Fig 5: Locating VVT Sensor Connectors
      GTY268217Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and 4 VVT sensors.
scientia non olet · About LEMON Manuals