Remote Up / Down Function does not Operate: Procedure
- CHECK LIN COMMUNICATION SYSTEM
- Check for LIN communication system DTCs related to the power window control system. Refer to DTC CHECK / CLEAR [01/2012 - ]
.
OK
LIN communication system DTCs are not output.
NG → See step 4
OK: Go to next step
- Check for LIN communication system DTCs related to the power window control system. Refer to DTC CHECK / CLEAR [01/2012 - ]
.
- CHECK MULTIPLEX NETWORK MASTER SWITCH (WINDOW LOCK SWITCH)
- Turn the window lock switch off and operate the switches on the multiplex network master switch. Check that the remote up/down function operates. Refer to OPERATION CHECK [01/2012 - ]
.
OK
Remote up/down function operates.
NG → See step 3
OK → END
- Turn the window lock switch off and operate the switches on the multiplex network master switch. Check that the remote up/down function operates. Refer to OPERATION CHECK [01/2012 - ]
.
- REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY. Refer to REMOVAL [01/2012 - ]
- GO TO LIN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [01/2012 - ]