Check For Intermittent Problems [08/2013 - ]

HINT: 

Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the Techstream when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.

1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
2. Switch the ECM from normal mode to check mode using the Techstream. Refer to CHECK MODE PROCEDURE [08/2013 - ] .
3. Perform a simulation test. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ] .
4. Check and wiggle the harness(es), connector(s) and terminal(s). Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [08/2013 - ] .