Description & Operation: Notes

NOTE: The system will need to be initialized when tires are rotated; tires are replaced with tires of different pressures; tire pressure sensor and/or tire pressure monitor ECU are replaced. When a tire pressure sensor and/or tire pressure monitor ECU are replaced, the sensor ID must be memorized (Registered) by the tire pressure monitor ECU prior to system initialization. See RESET PROCEDURES .

NOTE: Initialization is NOT required if re-inflating tires to the specified tire pressure.

NOTE: When disconnecting the auxiliary battery negative (-) cable, initialize the following systems after the cable is reconnected: Parking Assist Monitor System and Power Door Lock Control System.