General Maintenance [09/2014 - 10/2015]: Procedure
- INSPECT DRIVE BELT
- Check the drive belt.
Type See procedures 2GR-FSE Refer to ON-VEHICLE INSPECTION [09/2014 - 10/2015]
- Check the drive belt.
- INSPECT ENGINE OIL
- Inspect the engine oil.
Type See procedures 2GR-FSE Refer to ON-VEHICLE INSPECTION [09/2014 - 10/2015]
- Inspect the engine oil.
- REPLACE ENGINE OIL AND OIL FILTER
- Replace the engine oil and oil filter.
Type See procedures 2GR-FSE Refer to REPLACEMENT [09/2014 - 10/2015]
- Replace the engine oil and oil filter.
- INSPECT ENGINE COOLANT
- Inspect the engine coolant.
Type See procedures 2GR-FSE Refer to ON-VEHICLE INSPECTION [09/2014 - 10/2015]
- Inspect the engine coolant.
- REPLACE ENGINE COOLANT
- Replace the engine coolant.
Type See procedures 2GR-FSE Refer to REPLACEMENT [09/2014 - 10/2015]
- Replace the engine coolant.
- REPLACE SPARK PLUGS
- Replace the spark plugs.
Type See procedures 2GR-FSE Refer to REMOVAL [09/2014 - 10/2015]
- Replace the spark plugs.
- INSPECT AIR CLEANER FILTER
- Remove the air cleaner filter.
- Check that the air cleaner is not excessively dirty. If the air cleaner is excessively dirty, replace the air cleaner filter element.
- Clean the air cleaner filter with compressed air.
- Reinstall the air filter.
- INSPECT EXHAUST PIPES AND MOUNTINGS
- Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
- INSPECT FUEL TANK CAP GASKET
- Check the fuel tank gasket.
Type See procedures 2GR-FSE Refer to INSPECTION [09/2014 - 10/2015]
- Check the fuel tank gasket.
- INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND
- Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.