LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> LS 600h >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostic Codes >> Pre-Collision System >> DTC C1A0A: Front Radar Sensor Region Code Mismatch [10/2014 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC C1A0A: Front Radar Sensor Region Code Mismatch [10/2014 - ]: Description

The driving support ECU uses the front millimeter wave radar sensor, driver monitor camera and object recognition camera to detect obstacles in front of and behind the vehicle, and detect the direction that the driver's head is facing. Based on this information, the driving support ECU sends pre-collision control operation signals.

When the front millimeter wave radar sensor is replaced with a new one, it acquires the country specification information from the driving support ECU. Also, when the driving support ECU is replaced with a new one, it receives country specification information from the combination meter. When country specification information in the sensor and ECU do not match, DTC C1A0A is output.

If the sensor and vehicle country specification information are the same, and the combination meter and the driving support ECU country specification information are different, C1A0C is output.

DTC Code DTC Detection Condition Trouble Area
C1A0A While initial check is running, power switch is on (IG) and pre-collision system is operating, country specification information in driving support ECU and front millimeter wave radar sensor do not match for 1 second
  • Front millimeter wave radar sensor
  • Combination meter
  • Driving support ECU