DTC C1A31: Driver Monitor Camera [10/2014 - ]: Procedure

1. Replace the driver monitor camera. Refer to REMOVAL [10/2014 - ] .

NEXT: Go to next step 

1. Using the Techstream, enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
2. Select "Clear" and clear the data.
3. Based on the DTC detection conditions, try to simulate the malfunction.
4. Recheck for DTC.

   OK

   DTC C1A31 is not output.

NG → See step   3 

OK → END (DRIVER MONITOR CAMERA IS DEFECTIVE)