LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> RC F >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System - Diagnostics - Introduction >> Power Window Control System >> Customize Parameters [09/2014 - ] >> Customize Parameters [09/2014 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [09/2014 - ]

  1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT: 

    The following items can be customized.

    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Power Window.
      5. Select the setting by referring to the table below.

        Power Window 

        Tester Display Description Default Setting ECU
        Door Key P/W Up This function is used to close the power windows by operating the mechanical key. OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down This function is used to open the power windows by operating the mechanical key. OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit This function is used to open the power windows using the wireless key transmitter. OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        D Window Auto Up This function is used to enable or disable the auto up function for the driver door power window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly LH (for driver door)
        P Window Auto Up This function is used to enable or disable the auto up function for the front passenger door power window using the power window regulator switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly RH (for front passenger door)
        P Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the front passenger door power window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly RH (for front passenger door)
        D Window Auto Down This function is used to enable or disable the auto down function for the driver door power window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly LH (for driver door)
        P Window Auto Down This function is used to enable or disable the auto down function for the driver door power window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly RH (for front passenger door)
        P Window Auto Down From Driver This function is used to enable or disable the remote auto down function for the front passenger door power window using the multiplex network master switch assembly. ON 0:OFF, 1:ON Power window regulator motor assembly RH (for front passenger door)
      6. Enter the following menus: Customize Setting / Wireless Door Lock.
      7. Select the setting by referring to the table below.

        Wireless Door Lock 

        Tester Display Description Default Setting ECU
        P/W Wireless Ope Buzz This function turns the wireless power window buzzer response on or off. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
      8. Enter the following menus: Customize Setting / Security.
      9. Select the setting by referring to the table below.

        Security 

        Tester Display Description Default Setting ECU
        Window Open Warning This function is used to enable or disable the window open warning. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals