April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [08/2014 - 08/2015]: Procedure

CUSTOMIZE POWER WINDOW CONTROL SYSTEM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function(s) can be customized.
Be sure to make notes of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Customizing with the Techstream

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Power Window.

Select the setting by referring to the table below.

POWER WINDOW

Tester Display	Default	Content	Setting	Relevant ECU
Door Key P/W Up	OFF	This function is used to close the windows by operating the mechanical key.	ON/OFF	Main body ECU (Multiplex network body ECU)
Door Key P/W Down	OFF	This function is used to open the windows by operating the mechanical key.	ON/OFF	Main body ECU (Multiplex network body ECU)
P/W Down w/ Transmitter	OFF	This function is used to open the windows using the wireless key transmitter.	ON/OFF	Main body ECU (Multiplex network body ECU)
P Window Auto Up	Avail	This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side).	Avail/Not Avl	Power window ECU (Power window regulator motor assembly)
P Window Auto Up From Driver	Avail	This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly.	Avail/Not Avl	Power window ECU (Power window regulator motor assembly)
RR Window Auto Up	Avail	This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear RH side).	Avail/Not Avl	Power window ECU (Power window regulator motor assembly)
RR Window Auto Up From Driver	Avail	This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly.	Avail/Not Avl	Power window ECU (Power window regulator motor assembly)
RL Window Auto Up	Avail	This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear LH side).	Avail/Not Avl	Power window ECU (Power window regulator motor assembly)
RL Window Auto Up From Driver	Avail	This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly.	Avail/Not Avl	Power window ECU (Power window regulator motor assembly)