Removal [07/2015 - ]: Procedure

PRECAUTION
NOTE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work (Refer to PRECAUTION [07/2015 - ] ).
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [07/2015 - ] ).
REMOVE FRONT FENDER LINER
HINT:

Use the same procedure for the LH side and RH side (Refer to REMOVAL [07/2015 - ] ).

REMOVE FRONT SPEED SENSOR

Disconnect the connector and disengage the clamp.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the bolt and front speed sensor clamp from the body.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the bolt, front flexible hose and front speed sensor clamp together from the front shock absorber assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	Front Speed Sensor Clamp
*2	Front Flexible Hose

Remove the bolt and front speed sensor from the steering knuckle.

NOTE:

Prevent foreign matter from attaching to the front speed sensor tip.
Clean the speed sensor installation hole and the contact surfaces every time the front speed sensor is removed.