LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> GS 200t Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Cancel Switch (Service Information) >> Pre-Collision System Cancel Switch >> Inspection [09/2014 - 10/2015] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [09/2014 - 10/2015]: Procedure

  1. INSPECT PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY462664Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pressed Below 1 Ω
      Not pressed 10 MΩ or higher

      If the result is not as specified, replace the pre-collision system cancel switch assembly.

      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Pre-collision System Cancel Switch Assembly)
scientia non olet · About LEMON Manuals