LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> GX 460 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Service Information) >> Throttle Body >> Removal [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2015 - ]: Procedure

  1. REMOVE LOWER FRONT BUMPER COVER 

    Refer to PROCEDURE - Step 7 [08/2015 - 08/2020] , or refer to PROCEDURE - Step 7 [08/2020 - ]

  2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8 [08/2015 - 08/2020] , or refer to PROCEDURE - Step 8 [08/2020 - ]

  3. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 5

  4. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 16 [08/2015 - 08/2020] , or refer to PROCEDURE - Step 16 [08/2020 - ]

  5. REMOVE AIR CLEANER CAP AND HOSE 

    Refer to PROCEDURE - Step 24 [08/2015 - 08/2020] , or refer to PROCEDURE - Step 24 [08/2020 - ]

  6. REMOVE THROTTLE BODY ASSEMBLY 
    1. Disconnect the No. 4 water by-pass hose and No. 12 water by-pass hose.
      GTY275118Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the throttle position sensor and control motor connector.
    3. Remove the 4 bolts, throttle body and gasket.
      GTY275114Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the No. 12 water by-pass hose from the throttle body.
      GTY275116Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the No. 4 water by-pass hose from the throttle body.
      GTY286395Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals