LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> IS 200t Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (8AR-FTS) - Service Information >> Manifold Absolute Pressure Sensor >> Inspection [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [08/2015 - ]: Procedure

  1. INSPECT NO. 1 TURBO PRESSURE SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY658795Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (No. 1 Turbo Pressure Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition
      4 (THIM) - 2 (E2) -20°C (-4°F) 13.8 to 18.6 kΩ
      20°C (68°F) 2.09 to 2.81 kΩ
      80°C (176°F) 0.274 to 0.370 kΩ

      If the result is not as specified, replace the No. 1 turbo pressure sensor.

scientia non olet · About LEMON Manuals