Removal [08/2015 - ]: Procedure

REMOVE ENGINE UNDER COVER
Refer to PROCEDURE - Step 11 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 11 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 11 [09/2020 - ]
DRAIN ENGINE COOLANT
Refer to PROCEDURE - Step 2

REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

Disconnect the injector connector (for Direct Injection).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Injector Connector (for Direct Injection)
*b	Engine Wire Connector

Disengage the 2 engine wire clamps.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 2 bolts and disconnect the No. 6 water by-pass pipe from the intercooler assembly and No. 2 air tube.
Disconnect the throttle body with motor assembly connector.

Slide the 2 hose clamps and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the throttle body with motor assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	No. 1 Water By-pass Hose
*2	No. 2 Water By-pass Hose

Remove the 8 bolts, No. 2 air tube and throttle body with motor assembly from the intercooler assembly and intake manifold assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE THROTTLE BODY GASKET

Remove the throttle body gasket from the intake manifold.

Remove the throttle body gasket from the No. 2 air tube.

REMOVE NO. 2 AIR TUBE GASKET

Remove the No. 2 air tube gasket from the intercooler assembly.