LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> IS 200t Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Cancel Switch - Service Information >> Pre-Collision System Cancel Switch >> Inspection [04/2013 - 10/2016] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [04/2013 - 10/2016]: Procedure

  1. INSPECT PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY469914Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Pre-collision System Cancel Switch Assembly)

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 - 2 Pressed Below 1 Ω
      1 - 2 Not pressed 10 kΩ or higher

      If the result is not as specified, replace the pre-collision system cancel switch assembly.

scientia non olet · About LEMON Manuals