Inspection [04/2013 - 10/2017]: Procedure
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 (M-) - 2 (M+) 20 °C (68 °F) 0.3 to 100 Ω *a Component without harness connected
(Throttle Body with Motor Assembly)If the result is not as specified, replace the throttle body with motor assembly.
- Measure the resistance according to the value(s) in the table below.