Installation [04/2013 - 10/2016]: Procedure

INSTALL FRONT STEERING CONTROL ECU
1. Install the front steering control ECU with the 2 bolts.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  HINT:
  
  Align the positioning boss of the blower assembly with the hole of the front steering control ECU.
2. Connect the 4 connectors to front steering control ECU.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Refer to PROCEDURE - Step 18
INSTALL FRONT NO. 2 CONSOLE BOX INSERT
Refer to PROCEDURE - Step 8
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
Refer to PROCEDURE - Step 12
INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
Refer to PROCEDURE - Step 1
PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
Refer to CALIBRATION [04/2013 - 10/2016]