Customize Parameters [09/2015 - ]: Procedure
- CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with the Techstream.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Seat.
- Select the setting by referring to the table below.
Display Default Content Setting Relevant ECU Seat Travel Distance*1 Noraml Function to change the Seat Travel Distance. OFF, Short or Noraml Main body ECU (Driver side junction block) Slide Link Cushion Length Ctrl*1 Avl Function to the physique compensation Cushion Length control when D-Seat is slide. Not Avl or Avl Front power seat switch Slide Link Hdrest Length Ctrl* Avl Function to the physique compensation head-rest control when D-Seat is slide. Not Avl or Avl Front power seat switch R&A Lumbar Support Oper*1 ON When the "Return & Away" operates, the function that "Lumbar Support" operates is stopped when it is "OFF". ON or OFF Front power seat switch P-Seat Auto Pattern*2 Auto-B Function to select the order of movement when P-seat auto moves. Auto-A, Auto-B or Auto-C No. 2 console switch Relax with P-Seat Lift*2 Avail Function to lift up P-seat when P-seat auto moves. Not Avl or Avail No. 2 console switch - *1: for Driver Side
- *2: for Passenger Side
- Customizing with the accessory meter
- Turn the engine switch on (IG).
- Enter the following menus: SET UP / Vehicle / Vehicle Customization / Other vehicle settings.
- Select the setting by referring to the table below.
Display Default Content Setting Relevant ECU Driver's seat easy exit Full Allows customization of the seat movement distance for the power easy access system. Full / Partial / Off Main body ECU (Driver side junction block)