Jam Protection Function does not Operate [09/2015 - ]: Procedure

1. Initialize the power window regulator motor assembly.
2. Check if the power window AUTO UP/DOWN function operates normally.

   OK

   AUTO UP/DOWN function operates normally.

Result:  NG

NG 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result:  OK

OK 

See step  2

1. Check if the jam protection function operates normally for applicable power window.

   HINT: 

   The jam protection function does not operate between the fully closed position of the door glass and the position 4 mm (0.157 in.) below the fully closed position.

   OK

   Jam protection function operates normally.

   RESULT:
   
   

   Result	Proceed to
   OK	A
   NG (Front LH side power window)	B
   NG (Front RH side power window)	C
   NG (Rear LH side power window)	D
   NG (Rear RH side power window)	E

Result:  A

A 

END 

Result:  B

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2015 - ] )

Result:  C

C 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2015 - ] )

Result:  D

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2015 - ] )

Result:  E

E 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2015 - ] )