Check For Intermittent Problems [09/2015 - ]

HINT: 

Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the Techstream when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [09/2015 - ] ).
2. Switch the ECM from normal mode to check mode using the Techstream (Refer to CHECK MODE PROCEDURE [09/2015 - ] ).
3. Perform a simulation test.
4. Check and wiggle the harness(es), connector(s) and terminal(s).