How To Proceed With Troubleshooting [09/2015 - ]: Procedure

Result

Result:  1

NEXT 

Refer to  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding.

Result

Result:  1

NEXT 

Refer to  3

1. Check for DTCs and make a note of any codes that are output.
2. Clear the DTC.
3. Recheck for DTCs. Based on the DTCs output in the first step, try to force output of the same DTC by simulating the symptoms indicated by the DTC.

   Result

   Result	Proceed to
   No DTCs output	A
   B2311 is output	B
   B2312 is output	B
   B2313 is output	B
   CAN communication system DTC output reoccur	C
   LIN communication system DTC output reoccur	D

Result:  2

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2015 - ]  

Result:  3

C 

GO TO CAN COMMUNICATION SYSTEM. Refer to  PRECAUTION [09/2015 - ] 

Result:  4

D 

GO TO LIN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ] 

Result:  1

A 

Refer to  4

1. Refer to the problem symptoms table.

   Refer to PROBLEM SYMPTOMS TABLE [09/2015 - ] 

   Result

   Result	Proceed to
   Fault not listed in problem symptoms table	A
   Fault listed in problem symptoms table	B

Result:  2

B 

Refer to  6

Result:  1

A 

Refer to  5

1. Operation Check.

   Refer to OPERATION CHECK [09/2015 - ] 

2. Terminals of ECU.

   Refer to TERMINALS OF ECU [09/2015 - ] 

3. Data List / Active Test.

   Refer to DATA LIST / ACTIVE TEST [09/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

Refer to  6

Result

Result:  2

B 

Refer to  8

Result:  1

A 

Refer to  7

1. Initialization the power window motor.

   Refer to INITIALIZATION [09/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

Refer to  8

Result

Result:  1

NEXT 

END