How To Proceed With Troubleshooting [09/2015 - ]: Procedure

Result

Result:  1

NEXT 

Refer to 2

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result:  1

NEXT 

Refer to 3

1. Using the Techstream, check if the CAN communication system is functioning normally.

   Refer to DIAGNOSIS SYSTEM [09/2015 - ]

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

Result:  2

B 

GO TO CAN COMMUNICATION SYSTEM (DIAGNOSTIC TROUBLE CODE CHART). Refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2015 - ] 

Result:  1

A 

Refer to 4

1. Check for DTCs and note any stored DTCs.

   Refer to DTC CHECK / CLEAR [09/2015 - ] 

2. Delete the DTCs.
3. Check whether the same DTC(s) relevant to the hybrid control system or smart access system with push-button start recurs by reproducing the symptoms indicated by the noted DTC(s) in the first step above.

   Result

   Result	Proceed to
   DTC output does not reoccur	A
   Hybrid control system DTC output reoccurs	B
   Smart access system with push-button start DTC output reoccurs	C

Result:  5

B 

GO TO HYBRID CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART). Refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2015 - ] 

Result:  2

C 

Refer to 7

Result:  1

A 

Refer to 5

Result

Result:  2

B 

Refer to 7

Result:  1

A 

Refer to 6

1. TERMINALS OF ECU

   Refer to TERMINALS OF ECU [09/2015 - ] 

2. DATA LIST / ACTIVE TEST

   Refer to DATA LIST / ACTIVE TEST [09/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

Refer to 7

Result

Result:  1

NEXT 

Refer to 8

Result

Result:  1

NEXT 

END