DTC C1A0C: Object Recognition Camera Region Code Mismatch [09/2015 - ]: Procedure

1. Using the Techstream, enter the following menus: Powertrain / Radar Cruise / Data List.
   RADAR CRUISE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Country# (Obj Recog ECU)	Object recognition ECU country signal/JPN, NA, EURO, SAFC, OTHER, TWN, CHINA, THAI, GCC or NOFIXN	NA	-

2. Read the Data List and check the country specification information of the object recognition ECU and vehicle.
   RESULT
   
   

   Result	Proceed to
   Country specification information for vehicle and object recognition ECU sensor match	A
   Country specification information for vehicle and object recognition ECU sensor do not match	B

   HINT: 

   The country specification information of the driving support ECU is decided by the combination meter. Even if the vehicle and object recognition ECU country specification information matches, if the country specification information for the vehicle and driving support ECU/meter do not match, it is necessary to replace the driving support ECU and meter.

Result:  A

A 

REPLACE COMBINATION METER AND DRIVING SUPPORT ECU 

Result:  B

B 

REPLACE OBJECT RECOGNITION ECU 

(Refer to REMOVAL [09/2015 - ] )