DTC C1A30: Driver Monitor ECU [09/2015 - ]: Procedure

1. Replace the driver monitor ECU (Refer to REMOVAL [09/2015 - ] ).

Result:  NEXT

NEXT 

See step  2

1. Using the Techstream, enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
2. Select "Clear" and clear the data.
3. Based on the DTC detection conditions, try to simulate the malfunction.
4. Recheck for DTC.

   OK

   DTC C1A30 is not output.

Result:  OK

OK 

END (DRIVER MONITOR ECU IS DEFECTIVE) 

Result:  NG

NG 

REPLACE DRIVING SUPPORT ECU 

(Refer to REMOVAL [09/2015 - ] )