LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> LS 600h >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Service Information >> Driver Monitor Ecu >> Installation [09/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2015 - ]: Procedure

  1. INSTALL DRIVER MONITOR ECU ASSEMBLY 
    1. Install the driver monitor ECU assembly with the nut.
    2. Install the ECU unit with the 2 nuts.

      Torque: 8.5 N*m (86 kgf*cm, 75 in.*lbf) 

    3. Connect the 3 connectors.
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY 

    Refer to PROCEDURE - Step 1

  3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 28

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 27

  5. INSTALL INSTRUMENT PANEL ORNAMENT 

    Refer to PROCEDURE - Step 29

  6. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 30

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - ] ).

  8. INSTALL BATTERY SERVICE HOLE COVER LH 

    Refer to PROCEDURE - Step 13

  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  10. CHECK SRS WARNING LIGHT 

    (Refer to DIAGNOSIS SYSTEM [09/2015 - ] )

scientia non olet · About LEMON Manuals