LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> RC 200t Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (8AR-FTS) - Service Information >> Camshaft Position Sensor >> Removal [10/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2015 - ]: Procedure

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side) 
    1. Disconnect the camshaft position sensor connector.
      GTY639718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
      NOTE:

      If a camshaft position sensor has been struck or dropped, replace it.

  3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side) 
    1. Disconnect the fuel pump assembly connector.
      GTY639716Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the camshaft position sensor connector.
      GTY639714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.
      NOTE:

      If a camshaft position sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals