Removal [09/2014 - 11/2017]: Procedure

Refer to REMOVAL [09/2014 - 11/2017]

1. Slide the clip and disconnect the water by-pass hose from the rear water by-pass joint.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the engine coolant temperature sensor connector.
2. Remove the engine coolant temperature sensor from the rear water by-pass joint.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   If the engine coolant temperature sensor has been struck or dropped, replace it.

3. Remove the gasket from the engine coolant temperature sensor.