LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> RC 300 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FSE) - Service Information >> Knock Sensor >> Removal [09/2014 - 11/2017] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [09/2014 - 11/2017]: Procedure

  1. REMOVE FUEL INJECTOR ASSEMBLY 

    Refer to REMOVAL [09/2014 - 11/2017]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
      GTY471224Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Engine Front
    2. Remove the 2 bolts and 2 knock control sensors from the cylinder block sub-assembly.
      NOTE:

      If a knock control sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals