Installation [08/2016 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2024 Lexus RC F, 2023 Lexus RC F, 2022 Lexus RC F, 2021 Lexus RC F, and 2020 Lexus RC F. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ACCELERATION SENSOR
- Install the acceleration sensor with the 2 nuts.
Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf)
NOTE:- Avoid any impact to the acceleration sensor.
- Do not drop the acceleration sensor. If it is dropped, replace it with a new one.
- Connect the connector.
- Return the floor carpet to its original position.
- Install the acceleration sensor with the 2 nuts.
- INSTALL FRONT DOOR OPENING TRIM COVER LH
Refer to PROCEDURE - Step 37 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 36 [11/2017 - ]
- INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 38 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 37 [11/2017 - ]
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [08/2016 - 11/2017] , or refer to INITIALIZATION [11/2017 - 03/2019] , or refer to INITIALIZATION [03/2019 - 01/2023] , or refer to INITIALIZATION [01/2023 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]