Utility [01/2023 - ]

If any of the following parts has been replaced due to pre-collision system malfunction, those systems using those parts may be affected without performing necessary operations.

• Forward recognition camera

  HINT: 

  Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

  One Time Recognition: Refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [01/2023 - ]

  Sequential Recognition: Refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [01/2023 - ]

  Driving Adjustment: Refer to DRIVING ADJUSTMENT [01/2023 - ]

• Millimeter wave radar sensor assembly

  HINT: 

  Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

  Triangle Target: Refer to TARGET ADJUSTMENT(TRIANGLE TARGET) [01/2023 - ]

  Flat Surface Target: Refer to TARGET ADJUSTMENT(FLAT SURFACE TARGET) [01/2023 - ]

  Driving Adjustment: Refer to DRIVING ADJUSTMENT [01/2023 - ]