LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> CT 200h Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information >> Skid Control Buzzer >> Removal [08/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2014 - ]: Procedure

  1. PRECAUTION 
    WARNING:

    Be sure to read Precaution thoroughly before servicing (See article. Refer to PRECAUTION [08/2014 - ] ).

    NOTE:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal, Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work (See article. Refer to PRECAUTION [08/2014 - ] ).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    (See article. Refer to REMOVAL [08/2014 - ] )

    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  4. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to PROCEDURE - Step 9

  5. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Disengage the clamp to remove the skid control buzzer assembly.
      GTY355850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the skid control buzzer connector.
scientia non olet · About LEMON Manuals