Installation [08/2014 - ]: Procedure

HINT: 

Perform "Inspection After Repair" after replacing a spark plug (See article. Refer to INITIALIZATION [08/2014 - ] ).

1. Using a 14 mm spark plug wrench, install the 4 spark plugs.

   Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

HINT: 

Perform "Inspection After Repair" after replacing an ignition coil assembly (See article. Refer to INITIALIZATION [08/2014 - ] ).

1. Install the 4 ignition coils with the 4 bolts.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   When installing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

2. Connect the 4 ignition coil connectors.

Refer to PROCEDURE - Step 99

1. Perform "Inspection After Repair" after replacing a spark plug or ignition coil assembly (See article. Refer to INITIALIZATION [08/2014 - ] ).