Installation [07/2015 - ]: Procedure

INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 16 new hog rings.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.

Using hog ring pliers, install 2 new hog rings.

NOTE:

Be careful not to damage the cover.

INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 27
INSTALL FRONT SEAT CUSHION SHIELD
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 30
INSTALL RECLINING POWER SEAT SWITCH KNOB
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 35
INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 36
INSTALL FRONT POWER ADJUSTER SHIELD
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 37
INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 38
INSTALL FRONT SEAT INNER BELT ASSEMBLY
HINT:

Use the same procedures described for the LH side. Refer to 3
INSTALL FRONT SEAT INNER CUSHION SHIELD
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 43
CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/o Foot Light)
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 45
CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Foot light)
HINT:

Use the same procedures described for the LH side. Refer to PROCEDURE - Step 46
INSTALL FRONT SEAT ASSEMBLY
HINT:

Use the same procedures described for the LH side. Refer to INSTALLATION [07/2015 - ]