How To Proceed With Troubleshooting [07/2015 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

Result

Result:  1

NEXT 

See step  3

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result:  1

NEXT 

See step  4

Result

Result:  1

NEXT 

See step  5

1. Refer to DTC Check / Clear (Refer to DTC CHECK / CLEAR [07/2015 - ] ).

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  6

Result

Result:  1

NEXT 

See step  7

1. Refer to Check Mode Procedure (Refer to CHECK MODE PROCEDURE [07/2015 - ] ).

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  8

1. Refer to Road Test (Refer to ROAD TEST [07/2015 - ] ).

   Result

   Result	Proceed to
   Symptom does not occur	A
   Symptom occurs	B

Result:  2

B 

See step  10

Result:  1

A 

See step  9

1. Refer to Symptom Simulation (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2015 - ] ).

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  10

1. Refer to DTC Check / Clear (Refer to DTC CHECK / CLEAR [07/2015 - ] ).

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

Result:  2

B 

See step  18

Result:  1

A 

See step  11

1. Refer to Park/Neutral Position Switch Assembly (Refer to ADJUSTMENT [07/2015 - ] ).
2. Refer to Shift Lever Assembly (Refer to ADJUSTMENT [07/2015 - ] ).

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

See step  21

Result:  1

OK 

See step  12

1. Refer to Mechanical System Tests (Refer to MECHANICAL SYSTEM TESTS [07/2015 - ] ).

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

See step  17

Result:  1

OK 

See step  13

1. Refer to Hydraulic Test (Refer to HYDRAULIC TEST [07/2015 - ] ).

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

See step  17

Result:  1

OK 

See step  14

1. Refer to Manual Shifting Test (Refer to MANUAL SHIFTING TEST [07/2015 - ] ).

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

See step  16

Result:  1

OK 

See step  15

1. Refer to Problem Symptoms Table (Refer to PROBLEM SYMPTOMS TABLE [07/2015 - ] ).

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

See step  19

Result:  1

OK 

See step  16

1. Refer to Problem Symptoms Table (Refer to PROBLEM SYMPTOMS TABLE [07/2015 - ] ).

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  17

Result

Result:  2

NEXT 

See step  21

1. Refer to Diagnostic Trouble Code Chart (Refer to DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ] ).

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  19

Result

Result:  1

NEXT 

See step  20

Result

Result:  1

NEXT 

See step  21

Result

Result:  1

NEXT 

See step  22

Result

Result:  1

NEXT 

END