Installation [09/2014 - 10/2015]: Procedure

INSTALL SEAT BELT CONTROL ECU
1. Install the seat belt control ECU to the parking brake ECU assembly with the 2 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the 2 connectors.
3. Connect the No. 1 junction block assembly to the parking brake ECU assembly with the 2 nuts.
4. Attach the clamp.
5. Connect the parking brake ECU assembly to the vehicle body with the 2 nuts.
INSTALL FUEL LID WITH LOCK MOTOR ASSEMBLY
(Refer to INSTALLATION [09/2014 - ] )