Installation [09/2014 - ]: Procedure

1. Install the yaw rate sensor to the No. 1 console box mounting bracket with the 2 nuts.

   Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

   NOTE:

   Do not drop the yaw rate sensor. A yaw rate sensor that is dropped cannot be used.

1. Install the No. 1 console box mounting bracket with the 3 bolts.

   Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

   NOTE:

   • If the yaw rate sensor is dropped, replace it.
   • After installation, make sure that the sensor is not tilted due to the floor carpet or any foreign object being pinched by parts.
2. Connect the sensor connector.
   NOTE:

   Securely connect the connector.

3. Attach the clamp and connect the indoor electrical key oscillator to the No. 1 console box mounting bracket.

(Refer to INSTALLATION [09/2014 - ] )

(Refer to CALIBRATION [09/2014 - 10/2015] or refer to CALIBRATION [10/2015 - ] )