Installation [10/2015 - ]: Procedure
- INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY
HINT:
Perform "Inspection After Repairs" after replacing the intake mass air flow meter sub-assembly. (Refer to INITIALIZATION [10/2015 - 09/2018] or refer to INITIALIZATION [09/2018 - ] )
- Install the intake mass air flow meter sub-assembly with the 2 screws.
Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf)
- Connect the connector to the intake mass air flow meter sub-assembly.
- Install the intake mass air flow meter sub-assembly with the 2 screws.
- INSTALL COOL AIR INTAKE DUCT SEAL
Refer to PROCEDURE - Step 117
- INSTALL ENGINE ROOM SIDE COVER
Refer to PROCEDURE - Step 118