Tie Rod &/Or End: Remove & Replace

Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If removal of the Rack and Pinion Gear is necessary, use Steering Gear (Complete) - R&R plus combinations.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
w/o Rear Wheel Steering,Outer,Both		1.2		B
w/o Rear Wheel Steering,Outer,One Side		0.9		B
w/Rear Wheel Steering,Front Axle,Outer,Both		1.2		B
w/Rear Wheel Steering,Front Axle,Outer,One Side		0.9		B
w/Rear Wheel Steering,Rear Axle,Outer,Both		1.2		B
w/Rear Wheel Steering,Rear Axle,Outer,One Side		0.9		B
Combination Procedure: YAW RATE SENSOR: Calibrate:
		0.2		B