LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> GS 450h Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (Service Information) >> Oil Level Sensor >> Installation [09/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2014 - ]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. CONNECT INVERTER COOLING PIPE 
    1. Connect the inverter cooling pipe with the 3 bolts.

      Torque: 22 N*m (224 kgf*cm, 16 ft.*lbf) 

  3. ADD ENGINE OIL 

    See step  5

  4. INSPECT FOR OIL LEAK 

    See step  6

  5. INSPECT ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 2

  6. INSTALL NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 111 Refer to PROCEDURE - Step 110

  7. INSTALL FRONT SUSPENSION MEMBER BRACE 

    Refer to PROCEDURE - Step 112 Refer to PROCEDURE - Step 111

  8. INSTALL ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 115 Refer to PROCEDURE - Step 114

scientia non olet · About LEMON Manuals