Removal [10/2015 - ]: Procedure

Refer to PROCEDURE - Step 1

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the screw and separate the front fender liner.

1. Disconnect the pad wear indicator wire connector from the front skid control sensor wire.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Pad Wear Indicator Wire
   *2	Front Skid Control Sensor Wire

2. Disconnect the front skid control sensor wire connector from the front axle hub sub-assembly.
3. Remove the bolt and sensor clamp from the steering knuckle.
4. Remove the 2 bolts and 2 sensor clamps from the front shock absorber assembly and vehicle body.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

5. Turn back the front fender liner.
6. for LH Side:
   1. Disengage the clamp from the front No. 1 stabilizer bracket LH.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   2. Remove the bolt and sensor clamp from the vehicle body.
   3. Disconnect the connector to remove the front skid control sensor wire LH.
7. for RH Side:
   1. Disengage the 2 clamps from the front No. 1 stabilizer bracket RH and vehicle body.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   2. Remove the bolt and sensor clamp from the vehicle body.
   3. Disconnect the connector to remove the front skid control sensor wire RH.

Refer to PROCEDURE - Step 2

Refer to PROCEDURE - Step 7

Refer to PROCEDURE - Step 5

HINT: 

• If the front speed sensor rotor needs to be replaced, replace the front axle hub sub-assembly.
• The front speed sensor is a component of the front axle hub sub-assembly. If the front speed sensor is malfunctioning, replace the front axle hub sub-assembly.