LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> GS F >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Crankshaft Position Sensor >> Removal [10/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2015 - ]: Procedure

  1. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 15 [09/2017 - 05/2018], or Refer to PROCEDURE - Step 16 [05/2018 - ]

  2. REMOVE NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 17 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 17 [09/2017 - 05/2018], or Refer to PROCEDURE - Step 18 [05/2018 - ]

  3. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
      GTY515741Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.
      NOTE:

      If the crankshaft position sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals