LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> GS F >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Engine Oil Temperature Sensor >> Removal [10/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [10/2015 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 2 [09/2017 - 05/2018], or Refer to PROCEDURE - Step 2 [05/2018 - ]

  2. REMOVE COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 1 [10/2015 - 09/2017], or Refer to PROCEDURE - Step 1 [09/2017 - ]

  3. REMOVE CENTER NO. 4 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 2

  4. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 4

  5. DRAIN ENGINE OIL 

    Refer to PROCEDURE - Step 1

  6. DISCONNECT VENTILATION HOSE 

    See step  5

  7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE 

    See step  6

  8. REMOVE RADIATOR RESERVE TANK ASSEMBLY 

    Refer to PROCEDURE - Step 12

  9. REMOVE ENGINE OIL TEMPERATURE SENSOR 
    1. Disconnect the engine oil temperature sensor connector.
      GTY515731Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the engine oil temperature sensor from the oil filter bracket sub-assembly.
      NOTE:

      If the engine oil temperature sensor has been struck or dropped, replace it.

      GTY515955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the gasket from the engine oil temperature sensor.
scientia non olet · About LEMON Manuals